This product was manufactured for Maxim by an outside wafer foundry using a process that is no longer available. It is not recommended for new designs. For further information, contact us. The data sheet remains available for existing users.
To the best of our knowledge, a second-source replacement for this part is available from Analog Devices.
Maxim's MX584 is a temperature-compensated,
bandgap voltage reference which provides pin-programmable
output voltages of +10.00V, +7.50V, +5.00V, and
+2.50V. External components are not required for these
outputs, but if other voltages are desired, they can be
programmed with external resistors.
Laser trimming minimizes output error as well as temperature
drift, to as low as 10mV and 15ppm/°C with
the MX584K.
The input voltage range of the MAX584 is 4.5V to 30V.
The reference also includes a STROBE input which
shuts down the reference output. Typical current drain
when ON is 750µA. This drops to about 100µA when
the reference is strobed OFF.
The MX584 is designed for use with 8- to 14-bit A/D
and D/A converters as well as data acquisition systems.
It is available in 8-lead TO-99 metal cans, plastic DIPS,
CERDIPS, and SO packages.
Download
E-Mail
