The MAX9719A evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX9719A stereo, differential audio amplifier to drive a pair of bridge-tied-load (BTL) speakers in portable audio applications. Designed to operate from a 2.7V to 5.5V DC power supply, the EV kit is capable of delivering 2 x 1.1W into a pair of 8Ω speakers.
The MAX9719A inputs can accept a common-mode input voltage of 0.5V through (VCC - 1.2V) from a DC-coupled source, therefore eliminating the need for input-signal coupling capacitors. The EV kit provides an option to bypass the input-signal coupling capacitors when the DC offset level of the input signals is within an acceptable range. The MAX9719A EV kit also evaluates the MAX9719B, MAX9719C, and MAX9719D.
Key Features
Applications/Uses
Also Evaluates the MAX9719B/C/D (IC and Component Replacement Required)
2.7V to 5.5V Single-Supply Operation
Drives 2 x 1.1W Into Stereo 8Ω Speakers at 1% THD+N
Differential Inputs
100nA Shutdown Current (typ)
Small 16-Pin TQFN (4mm x 4mm) Package
Also Available in 16-Bump UCSP and 16-Pin TSSOP-EP Packages
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-1
of
1
MAX9719AEVKIT
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9719AEVKIT
See data sheet
Related Products
MAX9718, MAX9719 Low-Cost, Mono/Stereo, 1.4W Differential Audio Power Amplifiers
Download
E-Mail
