The MAX9705 3rd-generation, ultra-low EMI, mono, Class
D audio power amplifier provides Class AB performance
with Class D efficiency. The MAX9705 delivers 2.3W into
a 4Ω load and offers efficiencies above 85%. Active emissions limiting (AEL) circuitry greatly reduces EMI by
actively controlling the output FET gate transitions under
all possible transient output-voltage conditions. AEL prevents
high-frequency emissions resulting from conventional
Class D free-wheeling behavior in the presence of
an inductive load. Zero dead time (ZDT) technology
maintains state-of-the-art efficiency and THD+N performance
by allowing the output FETs to switch simultaneously
without cross-conduction. A patented spread-spectrum
modulation scheme eliminates the need for output
filtering found in traditional Class D devices. These
design concepts reduce an application's component
count and extend battery life.
The MAX9705 offers two modulation schemes: a fixed-frequency
(FFM) mode and a spread-spectrum (SSM)
mode that further reduces EMI-radiated emissions due to
the modulation frequency. The MAX9705 oscillator can
be synchronized to an external clock through the SYNC
input, allowing the switching frequency to be externally
defined. The SYNC input also allows multiple MAX9705s
to be cascaded and frequency locked, minimizing interference
due to clock intermodulation. The device utilizes
a fully differential architecture, a full-bridged output, and
comprehensive click-and-pop suppression. The gain of
the MAX9705 is set internally (MAX9705A: 6dB,
MAX9705B: 12dB, MAX9705C: 15.6dB, MAX9705D:
20dB), further reducing external component count.
The MAX9705 is available in 10-pin TDFN (3mm x 3mm x
0.8mm) and 12-bump UCSP™ (1.5mm x
2mm x 0.6mm) packages. The MAX9705 is specified over
the extended -40°C to +85°C temperature range.
Key Features
Applications/Uses
Filterless Amplifier Passes FCC-Radiated Emissions Standards with 24in of Cable
Unique Spread-Spectrum Mode and Active Emissions Limiting (AEL) Achieves Better than 20dB Margin Under FCC Limits
Zero Dead Time (ZDT) H-Bridge Maintains State-of-the-Art Efficiency and THD+N
Simple Master-Slave Setup for Stereo Operation
Up to 90% Efficiency
2.3W into 4Ω (1% THD+N)
Low 0.02% THD+N (POUT = 1W, VDD = 5.0V)
High PSRR (75dB at 217Hz)
Integrated Click-and-Pop Suppression
Low Quiescent Current (5.4mA)
Low-Power Shutdown Mode (0.3µA)
Short-Circuit and Thermal-Overload Protection
Available in Thermally Efficient, Space-Saving Packages
10-Pin TDFN (3mm x 3mm x 0.8mm)
12-Bump UCSP (1.5mm x 2mm x 0.6mm)
Pin-for-Pin Compatible with the MAX9700 and MAX9712
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-16
of
16
MAX9705
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9705DETB+
TDFN;10 pin;
Dwg: 21-0137 (PDF)
Use pkgcode/variation: T1033+1*
MAX9702 1.8W, Filterless, Stereo, Class D Audio Power Amplifier and DirectDrive Stereo Headphone Amplifier MAX9701 1.3W, Filterless, Stereo Class D Audio Power Amplifier MAX9851, MAX9853 Stereo Audio CODECs with Microphone, DirectDrive Headphones, Speaker Amplifiers, or Line Outputs
Download
E-Mail
