QuickView

Technical Documents

Ordering Info

More Information

User Comments (0)

All

Data Sheet

FULL DATA SHEET (PDF, 1.1MB) Download   E-Mail

Errata

Errata DS26303 26303A1.pdf  Errata DS26303 26303A2.pdf

Description

The DS26303 is an 8-channel short-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A wide variety of applications are supported through internal termination or external termination. A single bill of material can support E1/T1/J1 with minimum external components. Redundancy is supported through nonintrusive monitoring, optimal high-impedance modes, and configurable 1:1 or 1+1 backup enhancements. An on-chip synthesizer generates the E1/T1/J1 clock rates by a single master clock input of various frequencies. Two clock output references are also offered.

Key Features		Applications/Uses
8 Complete E1, T1, or J1 Short-Haul Line Interface Units Independent E1, T1, or J1 Selections Internal Software-Selectable Transmit and Receive-Side Termination Crystal-Less Jitter Attenuator Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding Detection and Generation of AIS Digital/Analog Loss-of-Signal Detection as per T1.231, G.775, and ETS 300 233 External Master Clock can be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock will be Internally Adapted for T1 or E1 Use Built-In BERT Tester for Diagnostics 8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface Hardware Mode Interface Support Transmit Short-Circuit Protection G.772 Nonintrusive Monitoring Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233 Single 3.3V Supply with 5V Tolerant I/O JTAG Boundary Scan as per IEEE 1149.1 144-Pin eLQFP Package		ATM and Frame Relay Equipment E1/T1/J1 LAN/WAN Routers E1/T1/J1 Multiplexer and Channel Banks ISDN Primary Rate Interface T1 Digital Cross-Connects Wireless Base Stations

Application Notes

Application Note 3915: DS26303 Short-Haul Line Interface Unit vs. LXT384 - DS26303 Application Note 3916: DS26303 Short-Haul Line Interface Unit vs. IDT82V2048 - DS26303 Application Note 3919: Initilization and Configuration of the DS26303 LIU - DS26303

Evaluation Kits

DS26303DK

Design Guides

Communications (PDF)

Reliability Reports

Reliability Report: DS26303.pdf

Software/Models

DS26303 BSDL Model DS26303 Cadence Allegro Symbol DS26303 Cadence Concept Symbol DS26303 A2 BSDL Model

Ordering Information
Notes: Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices: 1-15 of 15
DS26303	Free Sample	Buy	Package: TYPE PINS FOOTPRINT   DRAWING CODE/VAR *	Temp	RoHS/Lead-Free? Materials Analysis
DS26303-75DK			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS26303L-75A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	0°C to +70°C	See data sheet Materials Analysis
DS26303L-75+A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	0°C to +70°C	See data sheet Materials Analysis
DS26303L-120A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	0°C to +70°C	See data sheet Materials Analysis
DS26303L-120+A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS26303LN-120+A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	-40°C to +85°C	See data sheet Materials Analysis
DS26303LN-75A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	-40°C to +85°C	See data sheet Materials Analysis
DS26303LN-75+A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	-40°C to +85°C	See data sheet Materials Analysis
DS26303LN-120A3			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	-40°C to +85°C	See data sheet Materials Analysis
DS26303L-120			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS26303L-75			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE-3*	0°C to +70°C	RoHS/Lead-Free: No Materials Analysis
DS26303L-120+			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS26303L-75+			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	0°C to +70°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS26303LN-120+			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis
DS26303LN-75+			LQFP;144 pin; Dwg: 21-0300 (PDF) Use pkgcode/variation: C144LE+3*	-40°C to +85°C	RoHS/Lead-Free: Lead Free Materials Analysis

More Information

Product Ad: Download

Related Products

DS26324 3.3V, 16-Channel, E1/T1/J1 Short-Haul Line Interface Unit DS21448 3.3V E1/T1/J1 Quad Line Interface

Didn't Find What You Need?

Next Day Product Selection Assistance from Applications Engineers Parametric Search Applications Help

QuickView

Technical Documents

Ordering Info

More Information

Description   Key Features   Applications/Uses   Key Specifications   Diagram

Data Sheet   Errata   Application Notes   Design Guides   Engineering Journals   Reliability Reports   Software/Models   Evaluation Kits

Price and Availability   Samples   Buy Online   Package Information   Lead-Free Information

Related Products   Notes and Comments   Evaluation Kits