The MAX7030 crystal-based, fractional-N transceiver is designed to transmit and receive ASK/OOK data at factory-preset carrier frequencies of 315MHz, 345MHz†, or 433.92MHz with data rates up to 33kbps (Manchester encoded) or 66kbps (NRZ encoded). This device generates a typical output power of +10dBm into a 50Ω load, and exhibits typical sensitivity of -114dBm. The MAX7030 features separate transmit and receive pins (PAOUT and LNAIN) and provides an internal RF switch that can be used to connect the transmit and receive
pins to a common antenna.
The MAX7030 transmit frequency is generated by a 16-bit, fractional-N, phase-locked loop (PLL), while the receiver's local oscillator (LO) is generated by an integer-N PLL. This hybrid architecture eliminates the need for separate transmit and receive crystal reference oscillators because the fractional-N PLL is preset to be 10.7MHz above the receive LO. Retaining the fixed-N PLL for the receiver avoids the higher current-drain requirements of a fractional-N PLL and keeps the receiver current drain as low as possible. All frequency generation
components are integrated on-chip, and only a crystal, a 10.7MHz IF filter, and a few discrete components are required to implement a complete antenna/digital data solution.
The MAX7030 is available in a small, 5mm × 5mm, 32-pin thin QFN package, and is specified to operate over the automotive -40°C to +125°C temperature range.
†Consult factory for availability.
Key Features
Applications/Uses
+2.1V to +3.6V or +4.5V to +5.5V Single-Supply Operation
Single-Crystal Transceiver
Factory-Preset Frequency (No Serial Interface Required)
ASK/OOK Modulation
+10dBm Output Power into 50Ω Load
Integrated TX/RX Switch
Integrated Transmit and Receive PLL, VCO, and Loop Filter
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-6
of
6
MAX7030
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX7030EVKIT-433
See data sheet
MAX7030EVKIT-315
See data sheet
MAX7030LATJ+
THIN QFN;32 pin;
Dwg: 21-0140 (PDF)
Use pkgcode/variation: T3255+3*
Download
E-Mail
