The MAX9502 small, low-power video amplifier with
integrated reconstruction filter operates from a supply
voltage as low as 2.5V. The small size and the low minimum
supply voltage make the MAX9502 ideal for
portable applications or small, low-power applications.
The MAX9502 DC-couples the input and the output,
resulting in a very small solution. The MAX9502 input can
be directly connected to the output of a video digital-to-analog
converter (DAC). The reconstruction filter is implemented
as a 4th-order Chebyshev with a minimum
passband of 5.5MHz, 3dB attenuation at 8MHz, and
55dB attenuation at 27MHz.
The output amplifier provides a closed-loop gain of
+6dB (MAX9502G) or +12dB (MAX9502M), and can
drive a 2VP-P video signal into a 150 load to ground. The output signal is level-shifted so the sync tip is
110mV (typ) above ground.
The MAX9502 operates from a 2.5V to 3.6V single supply
and consumes only 5.3mA quiescent supply current.
An active-low shutdown mode reduces the supply
current to 0.01µA.
The MAX9502 is available in tiny 6-pin µDFN (1mm x 1.5mm x 0.8mm) and 5-pin SC70 packages. The device is specified over the -40°C to +85°C extended and -40°C to +125°C automotive temperature ranges.
Key Features
Applications/Uses
Tiny 6-Pin µDFN (1mm x 1.5mm x 0.8mm) and 5-Pin SC70 Packages
DC-Coupled Input and Output Save Board Space
4-Pole Chebyshev Filter
5.5MHz Passband
55dB Attenuation at 27MHz
0.01µA Low-Current Shutdown Mode
2.5V to 3.6V Single-Supply Operation
Video Amplifier with Fixed Gains of +6dB (MAX9502G) or +12dB (MAX9502M)
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-20
of
20
MAX9502
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX9502GAALT+T
MicroDFN;6 pin;
Dwg: 21-0147 (PDF)
Use pkgcode/variation: L611+1*
MAX9503 DirectDrive® Video Amplifier with Reconstruction Filter MAX4090 3V/5V, 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current MAX4032 5V, 6dB Video Buffer with Sync-Tip Clamp, Output Sag Correction, and 150nA Shutdown Current MAX9505 DirectDrive Video Amplifier with Reconstruction Filter and Analog Switch MAX4412, MAX4413 Low-Cost, Low-Power, Ultra-Small, 3V/5V, 500MHz Single-Supply Op Amps with Rail-to-Rail Outputs
Download
E-Mail
load to ground. The output signal is level-shifted so the sync tip is
110mV (typ) above ground.
