The MAX5926 evaluation kit (EV kit) is designed to evaluate
the MAX5926 hot-swap controller. The hot-swapped
supply (VS) has a range of 1V to 13.2V provided that the
device supply (VCC) is at or above 2.25V and VS does
not exceed VCC.
The current-trip setting is approximately 6A for a full
load 5A system. The actual current-trip setting is
dependent on temperature as well as the tolerances of
RCB, RCBF, ICB, VCB_OS, and RDS(ON).
The MAX5926 EV kit was conveniently designed with
jumpers to activate the enables (EN1, active-low EN2), fault management
(LATCH), temperature coefficient tracking (TC),
adjustable output slew rate (SLEW), and power-up short-circuit
detection (SC_DET).
|
Download
E-Mail
