The DS3510 is a programmable gamma and VCOM voltage generator which supports both real-time updating as well as multibyte storage of gamma/VCOM data in on-chip EEPROM memory. An independent 8-bit DAC, two 8-bit data registers, and 4 bytes of EEPROM memory are provided for each individually addressable gamma or VCOM channel. High-performance buffer amplifiers are integrated on-chip, providing rail-to-rail, low-power (400µA/gamma channel) operation. The VCOM channel features a high-current drive (> 250mA peak) and a fast-settling buffer amplifier optimized to drive the VCOM node of a wide range of TFT-LCD panels.
Programming occurs through an I²C-compatible serial interface. Interface performance and flexibility are enhanced by a pair of independently loaded data registers per channel, as well as support for I²C speeds up to 400kHz. The multitable EEPROM memory enables a rich variety of display system enhancements, including support for temperature or light-level-dependent gamma tables, enabling of factory or field automated display adjustment, and support for backlight dimming algorithms to reduce system power. Upon power-up and depending on mode, DAC data is selected from EEPROM by the S0/S1 pads or from a fixed memory address.
Key Features
Applications/Uses
8-Bit Gamma Buffers, 10 Channels
8-Bit VCOM Buffer, 1 Channel
4 EEPROM Bytes per Channel
Low-Power 400µA/ch Gamma Buffers
I²C-Compatible Serial Interface
Flexible Control from I²C or Pins
9.0V to 15.0V Analog Supply
2.7V to 5.5V Digital Supply
48-Pin Package (TQFN 7mm x 7mm)
Adaptive Gamma and VCOM Adjustment (Real-Time by I2C, Select EEPROM Through I2C or S0/S1 Pads)
Download
E-Mail
